Description
Artec UDM 250 800 GS M Series U cylinder specifications
Artec UDM 250 800 GS M is a double-acting Series U ISO 15552 pneumatic cylinder with a 250 mm bore and an 800 mm stroke. This version combines GS standard seals with a male threaded rod.
Key Product Details
Supplier: Artec
Product code: UDM 250 800 GS M
Description: Series U ISO 15552 double acting magnetic piston tie rod cylinder
Dimensions: 250 mm Bore x 800 mm Stroke
Working pressure: 1 to 10 bar
Air supply: filtered compressed air without added lubricant
Product category: Pneumatic Cylinders / Series U ISO 15552
Construction and configuration
The 800 mm travel from this 250 mm bore requires room for the extended rod as well as the cylinder body. Artec UDM 250 800 GS M uses an aluminium tube with external stainless steel tie rods; select magnetic position sensing separately. GS standard seals correspond to Artec's 0 to 80°C range under its stated air conditions. The M rod end has a male thread; select a compatible attachment and keep the load aligned. Artec shows adjustable pneumatic end cushioning for regular HDM and UDM executions.
Performance and selection
For Artec UDM 250 800 GS M, the current Series U catalogue gives theoretical extension and return forces for its 250 mm bore of 29,452 N and 28,274 N at 6 bar. Check usable force at the actual pressure, including friction and rod-side area. The G1 air ports need valve and hose sizes suited to the required cycle speed. The 800 mm stroke is included in the current standard stroke table. For fixture or transfer duties, check the guided load and mounting reactions in both directions. Check external guidance, rod bending and lateral loads over this long travel. The ISO 15552 envelope helps compare mounts; confirm actual centre distances and rod-end geometry against the machine.
Due to the technical nature of this product, please contact our sales team on 01342 826488 or email info@aegroup.uk.com if you have any questions.
Lead Time
Product Availability
We work with a wide network of trusted manufacturers and suppliers to offer a comprehensive range of industrial components and systems. Many popular items are held in stock and available for prompt dispatch. These products are supplied directly from our UK facilities where possible to minimise lead times.
Order In and Made to Order Items
Some specialist products are not held as off the shelf stock. These items are ordered directly from the manufacturer and may be produced to order or configured for specific applications. As a result, lead times can be longer than standard stocked products, particularly for low volume or unique items. Lead times will vary depending on supplier schedules and production requirements.
Lead Times and Order Updates
For all order in products, we aim to provide clear lead time information at the point of order or shortly afterwards. Our team will keep you informed throughout the process and will advise if supplier lead times change. If you have a time critical requirement, we recommend contacting us before placing your order so we can confirm availability.
Delivery Charges
Additional delivery charges may apply to large orders, oversized items, palletised shipments, or deliveries outside the UK mainland including remote locations. Our sales team can confirm any applicable charges either before or after your order is placed to ensure full transparency.
Availability and Lead Time Enquiries
For the latest information on product availability and current lead times, please contact our team directly. We will confirm stock status, supplier lead times, and delivery expectations to support your ordering decision. You can email info@aegroup.uk.com or call +44 (0)1342 826488 to speak with a member of our team who can assist with your enquiry.
More Than Components
Experts you can trust. Technologies you can depend on.
Air Engineering Group is more than a component supplier. We operate as an engineering partner supporting customers from concept through to long term operation. Our role extends beyond product supply into system design, integration, build, installation, and lifecycle support. This approach allows us to solve complex technical challenges while improving reliability, efficiency, and operational assurance across demanding industrial environments.
Our OEM Fluid Technology Division focuses on engineered solutions for original equipment manufacturers. We support customers with design input, component selection, manifold assemblies, sub assemblies, and fully integrated pneumatic and fluid systems. Working closely with OEM teams, we help reduce complexity, improve performance, and accelerate development while maintaining consistency from prototype through to production.
The Compressed Air and Gas Division delivers complete compressed air and gas solutions for industrial and commercial applications. This includes system design, equipment supply, installation, commissioning, servicing, and ongoing maintenance. By taking responsibility for the full system, we help customers improve uptime, control energy use, and protect critical assets throughout their operational life.
Our Pneumatic and Fluid Product Division provides a comprehensive range of valves, actuators, regulators, filtration, fittings, and control components. Supported by in house technical expertise, this division ensures customers specify the correct products for their application while benefiting from reliable supply and informed engineering support. Together, these three divisions position us as a complete engineering solutions provider rather than a simple distributor.
Our approach to business is built around a clear customer first focus supported by engineering integrity and accountability. We take time to understand each application, operating environment, and performance requirement before recommending or designing a solution. This ensures customers receive systems and components that deliver reliability, efficiency, and long term value rather than short term fixes. Through clear communication, responsive support, and consistent technical standards, we build trusted partnerships that prioritise uptime, risk reduction, and operational confidence.
Speak to our engineering team by emailing info@aegroup.uk.com or call +44 (0)1342 826488 to speak with a member of our team who can assist with your enquiry.
Applications & Integrations
Applications
Artec UDM 250 800 GS M is a 250 mm bore, 800 mm stroke tie-rod Series U actuator for a guided, higher-force fixture or material-handling mechanism. The stroke fixes the required linear movement, while the 250 mm bore affects available thrust at the machine’s actual pressure; select the load and cycle from those two dimensions together. In assembly or packaging equipment, it can move a properly supported workpiece between positions where a controlled straight-line stroke is required. The male rod end accommodates a matching threaded linkage or clevis, selected to suit the direction of travel. The GS standard seal configuration suits duties within the cylinder’s published air and temperature limits; a special seal requirement needs a separate selection.
Integrations
Integrate the 250 mm bore, GS seal, M rod-end UDM 250 800 GS M with a filtered, non-lubricated compressed-air supply at its G1 ports and size the external valve for powered extension and return. Compare the ISO 15552 tie-rod mounting arrangement with the chosen machine brackets and allow access to the 800 mm travel envelope. Select the rod-end attachment to suit the actual thread and keep transverse load on an external guide instead of the piston rod. If position feedback is required, specify a compatible magnetic sensor and wire it to an appropriate controller input as separate items. The GS standard seal version calls for the published standard operating environment rather than assuming a high-temperature execution.
